Spray Foam Insulation Arvada
Call Us: (720) 903-4439
You can improve your home’s energy performance by upgrading your attic insulation system. Whether it is for new installations, retrofits, weatherization, or air sealing in vented or unvented attics, spray polyurethane foam is the best choice.
If you seal cracks and air gaps around your home, many of which are normally located in attics, you can save up to 20% on your monthly utility bills, according to the Energy Star program of the EPA.
Along with squandering energy, a leaky attic drains your wallet also.
Experienced technicians at Spray Foam Pros can change old and substandard insulation with spray foam insulation. They can also upgrade your attic insulation system by sealing gaps around ductwork, studs, flues and components.
Home Owners in Arvada need attic insulation solutions that are tailored to meet their specific needs. Depending on your home’s needs, we can establish an attic insulation strategy for you.
To insulate your attic space and shield your home from other the elements and moisture related damages, spray foam insulation can be applied in 2 common ways– New Technology Building Science and Traditional Building Science
New Technology In Building Science
Insulation of Non-Ventilated Attics With Spray Foam:
The foam is sprayed directly onto the undersurface of the roof covering, in between the joists, down around the rim, and into the soffit areas of the gable end walls, effectively sealing off the attic space and insulating it from any kind of air infiltration. This application, considered the most effective in the SPF industry, completely seals the whole attic space from air leaks.
Normally, the undersides of roofs are not insulated in attics because “conventional” roofing and design methods call for attics to be ventilated in order to lower moisture problems and heat build-up during summer.
During the summer season, having said that, a vented attic in Arvada can very quickly turn into an oven with temperatures reaching 140 degrees. You should never have to run your air-conditioning and ductwork in such extreme conditions. In addition, condensation can form on these appliances. In Arvada, your attic is like a huge oven.
As a result of spraying spray foam straight on the underside of the roof deck, the attic is insulated from the extreme heat that once radiated through the hot roof shingles and roof sheathing. Excessive temperatures are no longer experienced in the attic. By doing so, the attic now turns into an area of your home that is just as comfortable as any other room in your home.
Traditional Building Science
For Vented Attics, Spray Foam Insulation Is Installed In The Attic Floor:
Your architect and/or home builder will likely suggest the method for using spray foam in the attic based upon the building science and design concepts they follow. To insulate the ceiling from seasonal heat and/or cold, insulation is applied on the attic floor in a conventional vented attic. In places where fiberglass batts are used, such as in between floor joists, spray foam can be used instead. Most of the attic is uninsulated and very ventilated by gable, soffit, and ridge vents in the roofing system structure. Although most common throughout the United States, this sort of designed system might not be the most effective.
The benefits of spray foam insulation for your attic are numerous. Contact the professionals at Spray Foam Pros in Arvada, CO, if you are thinking about installing spray foam insulation in your attic.
You may believe that you do not need to worry about leaks if your attic is vented and not part of the sealed thermal envelope of the building. There’s a likelihood that conditioned air is getting out from your living space because your attic is improperly sealed.
During the chilly months, warm air might leak unnoticed into your unconditioned attic from the joints at the attic top plate and around attic hatches left incorrectly finished by drywalling teams.
During the winter, many people understand just how unsafe it is to let heated air escape from your home. A poorly insulated attic can also raise your utility bills during the summer season in Arvada.
Depending on the temperature level outside, air accumulating under your roof covering might be even hotter than the air outdoors, so leaks like these between the living space of your home and its attic can be even worse! By filling these often-invisible spaces, Spray Foam Pros can help keep your hard-earned dollars from leaking out of improperly sealed vented attics.
Spray foam insulation is a great option if you’re building a new home, or if you would like to transform your existing attic into living or storage space. Your attic conditioning system depends on it and it can lead to considerable energy savings.
HVAC systems are commonly installed in attics to save space. The attic, if vented to the outdoors, are going to have all those ducts exposed to the outdoor temperature. For your home to remain comfortable, your HVAC system will have to work harder.
Adding spray polyurethane foam to your existing attic insulation will lower the load on your HVAC system and create more usable space in your home.
In finished attics, spray foam insulation is a superb choice for insulating behind knee walls and drop ceilings, yet it can also be applied under the roof decking and in between the roofing joists to integrate your attic with your home’s thermal envelope.
The use of spray polyurethane foam in conditioned attics can allow you to lower your HVAC system’s size by up to 35%. If you do this before the first season, you can save hundreds or thousands of dollars.
Attics are the intersection of the interior and exterior of a house, a labyrinth of joints, angles, and seams. When you factor in the HVAC ducts, vents, and electric cables which run down into the living spaces and pass through the building’s exterior sheathing, properly insulating an attic becomes difficult.
In attics, spray foam is a perfect choice for filling the uneven seams around obstacles due to the fact that it expands up to thirty times the volume of its component liquids. Spray foam can be used to cover the joints around:
A supplemental attic insulation installation is critical for year-round energy performance because heated air rises to the attic during the winter and receives the brunt of the sun during summers in Arvada
Spray polyurethane foam is among the best insulators on the market, with a typical R-value of 6.5. It also works as a moisture barrier beneath roofs, so it stops moisture from accumulating and causing mildew and mold to develop.
(720) 903-4439
Regardless of what sort of insulation you choose for your attic, it’s better than nothing. Attics in a lot of houses are usually insulated, but that insulation might be inadequate to make sure your home’s energy efficiency. It takes a lot of energy to keep your home comfortable, and one way to lower your energy usage is to upgrade your attic insulation. Attic and roof insulation can stop you from losing up to 20% of your conditioned air.
You can determine whether you have enough insulation by measuring the R-value, or the resistance to heat transfer. The R-value of 30 is commonly suggested by HVAC professionals and home builders, which indicates your attic needs to have at least 8.5 inches of insulation on the attic floor and insulation surrounding every one of your attic openings.
Your attic’s size, the material used, and how much is used will determine the cost. Open cell foam insulation costs between $1 and $1.20 per square foot, and closed cell foam insulation costs between $1.25 and $1.50 per square foot
When it comes to installing insulation in their attics, a lot of property owners favor spray foam insulation to fiberglass insulation. Virtually 85% of all united state homes have fiberglass insulation. Although it’s cheaper to install, spray foam is usually more effective, especially in extremely hot or cold environments. Spray foam insulation is usually airtight, while fiberglass insulation leaks air. The R-value of fiberglass is also lower than that of foam spray foam, at 2.2 per inch versus 3.5 per inch for open cell foam or 6 to 7 per inch for closed cell foam .
Although spray foam insulation costs more to install than other insulation types, it is often more efficient in the long run. The energy savings associated with spray foam attic insulation range between 15% and 50%. There will also be a visible difference in your home’s comfort levels. Correctly installed spray foam seals up spaces, allowing more conditioned air to enter your home. Additionally, your a/c unit or heater will run less often, while still keeping your home at a comfortable temperature level.
Using open cell or closed cell foam insulation will determine the thickness of the spray foam insulation you use. The roof deck needs to be sprayed with 6 inches of open cell spray foam insulation. Closed cell foam needs to be sprayed about 4 to 5 inches thick on the roofing deck.
With a convenient establishment in Arvada Colorado, Spray Foam Pros offers high quality spray foam to homeowners and businesses in Jefferson, Denver, Douglas, Adams, and Arapahoe Counties. We can help you lower energy expenses, reinforce structures, and weatherproof your property. For more details on spray polyurethane foam, please contact us at (720) 903-4439
– Residential Spray Foam Insulation
– Commercial Spray Foam Insulation
– Crawl Space Spray Foam Insulation
– Closed-cell Spray Foam Insulation
– Open-cell Spray Foam Insulation
– Attic Insulation
– Insulation Removal & More
Monday 8AM–6PM
Tuesday 8AM–6PM
Wednesday 8AM–6PM
Thursday 8AM–6PM
Friday 8AM–6PM
Saturday 8AM–4PM
Sunday Closed
This site is a free service to assist homeowners in connecting with local service contractors. All contractors are independent and this site does not warrant or guarantee any work performed. It is the responsibility of the property owner to verify that the hired contractor furnishes the necessary license and insurance required for the work being performed.